21 Gauge 1/2 Inch Wide Crown Pneumatic Stapler 8016/420

Short Description:

Product Detail

Overview

21 Gauge 1/2 Inch Wide Crown Pneumatic Stapler 8016/420

21 Gauge 1/2 Inch Wide Crown Pneumatic Stapler 8016/420 is a top of the line professional grade pneumatic fine wire stapler. It can be used for interior decorative finishes, automotive vinyl etc.

● Comfortable rubber grip.

● Uses same fasteners as BEA 80 and possibly Bostitch and Senco models.

● Ultra-lightweight at 2.2 lbs.

● Slim body to easy fit into tight spaces.

● Quick release magazine for easy loading.

Product Description

Model:	21 Gauge 1/2 Inch Wide Crown Pneumatic Stapler 8016/420
Air Tool Type:	Air Stapler
Tool Diamensions:	150mm x 45mm x 220mm
Net Tool Weight:	1.0kgs (2.20 lbs)
Operate Pressure:	60-100psi (4-7bar)
Load Capacity:	157 staples
Staples Type:	21 Guage 80 Series Fine Wire Staples
Staples Crown:	1/2″(12.8mm)
Staples Shank Diameter:	0.037″(0.95mm) x 0.025″(0.65mm)
Staples Length:	1/6″(4mm)~5/8″(16mm)

80 series staples

21 Guage 80 Series Fine Wire Staples

Staples Crown:1/2″(12.8mm)

Staples Shank Diameter:0.037″(0.95mm) x 0.025″(0.65mm)

Staples Length:1/6″(4mm)~5/8″(16mm)

Features

Lightweight body for easy operation.

Low noisy have good feedback from suctoerm.

Powerful strength and excellent durability.

Same as 380/16-420

Application

Furniture manke and repair.

Cloth and wood connection.

Picture frams.

Decoration.

F30

Our Services

No.	Symptom		Problems	Solutions
1.1	Air Leak	Air leak in the cylinder cap when tools don’t work	1.Loose head valve piston seal or o-rings .	Check and replace the head valve piston set
			2.Worn or damaged o-ring or cylinder cap gasket under cylinder cap	Check and replace o-ring or cylinder cap gasket under the cylinder cap
1.2		Air leak in Trigger area when tools don’t work	1.Damaged o-ring in trigger valve	Check and replace o-ring
			2.Damaged o-ring in trigger valve stem	Check and replace o-ring
			3.Dirt in the trigger valve	Check and clean the trigger valve
1.3		Air leak in cylinder cap when tools are working	1.Damaged head valve piston o-rings	Check and replace o-rings
			2.Damaged seal under cylinder cap	Check and replace seal
1.4		Air leak in nose when tools are working	1.Worn or damaged bumper	Check and replace bumper
			2.Loose driver(piston unit) thread	Check and replace driver(piston unit)
1.5		Air leak in Trigger area when tools are working	1.Worn or damaged trigger valve head	Check and replace trigger valve head
			2.Damaged head valve piston o-rings	Check and replace head valve piston o-rings
2	Failed to get driver(piston unit) back to the correct position completely.		1.The driver(piston unit) is not straight or the driver guide(nose) is wrong assembled.	Straighten the driver(piston unit) or verify driver guide(nose) and magazine
			2.Worn or damaged nozzle	Check and replace nozzle
			3.The space between piston o-ring and cylinder is too tight.	Check if the cylinder is adequate lubrication or replace the o-ring on the piston.