Dry Wall Screws - N5023 16 Gauge 1 in. Wide Crown Stapler – SXJ
Dry Wall Screws - N5023 16 Gauge 1 in. Wide Crown Stapler – SXJ Detail:
N5023 16 Gauge 1 in. Medium Crown Stapler
● Uses wide 1″ crown staples from 5/8″ – 2″ in length ● Lightweight design for comfort and control. ● Quick release cam-lock opens nose assembly to clear jammed staples, minimizing downtime. ● Rugged aluminum magazine has large holding capacity (up to 150 staples). ● Compact with less weight for all day use. ● Cylinder valve firing mechanism provides a quick response ● Lightweight and well-balanced for easy of maneuverability and less user fatigue. |
| Model: | N5023 16 Gauge 1 in. Wide Crown Stapler |
| Air Tool Type: | Air Stapler |
| Tool Diamensions: | 360mm x 76mm x 254mm (14-1/4″x10″x3″) |
| Net Tool Weight: | 2.42kgs(5.34 lbs) |
| Body Material: | Aliminum Body |
| Operate Pressure: | 70-120psi (5-8.3bar) |
| Load Capacity: | 150 staples |
| Staple Type: | 16 Gauge 1 in. Wide Crown Staple |
| Staples Shank Diameter: | 0.063″ x 0.055″ (1.6mm x 1.4mm) |
| Staple Crown: | 1″(25.2mm) |
| Staples Length: | 5/8″(16mm)-2″(50mm) |
16 Gauge 1 in. Wide Crown Staple Staples Shank Diameter:0.063″ x 0.055″ (1.6mm x 1.4mm) Staple Crown:1″(25.2mm) Staples Length:5/8“(16mm)-2″(50mm) |
Confortable rubber handle and ergonomic gun body design for easy operation.
Simple internal structure for easy maintenance application.
Bostitch wire crown with aluminum magazine.
Quick-release nosepiece for clearing jam.
Depth adjustment engineered for more precise flush and countersink finish.
Wire lathing
Insulation sheating
Furniture industry.
Interior construction.
Cabinets,
Packaging.
| No. | Symptom | Problems | Solutions | |
| 1.1 | Air Leak | Air leak in the cylinder cap when tools don’t work | 1.Loose head valve piston seal or o-rings . | Check and replace the head valve piston set |
| 2.Worn or damaged o-ring or cylinder cap gasket under cylinder cap | Check and replace o-ring or cylinder cap gasket under the cylinder cap | |||
| 1.2 | Air leak in Trigger area when tools don’t work | 1.Damaged o-ring in trigger valve | Check and replace o-ring | |
| 2.Damaged o-ring in trigger valve stem | Check and replace o-ring | |||
| 3.Dirt in the trigger valve | Check and clean the trigger valve | |||
| 1.3 | Air leak in cylinder cap when tools are working | 1.Damaged head valve piston o-rings | Check and replace o-rings | |
| 2.Damaged seal under cylinder cap | Check and replace seal | |||
| 1.4 | Air leak in nose when tools are working | 1.Worn or damaged bumper | Check and replace bumper | |
| 2.Loose driver(piston unit) thread | Check and replace driver(piston unit) | |||
| 1.5 | Air leak in Trigger area when tools are working | 1.Worn or damaged trigger valve head | Check and replace trigger valve head | |
| 2.Damaged head valve piston o-rings | Check and replace head valve piston o-rings | |||
| 2 | Failed to get driver(piston unit) back to the correct position completely. | 1.The driver(piston unit) is not straight or the driver guide(nose) is wrong assembled. | Straighten the driver(piston unit) or verify driver guide(nose) and magazine | |
| 2.Worn or damaged nozzle | Check and replace nozzle | |||
| 3.The space between piston o-ring and cylinder is too tight. | Check if the cylinder is adequate lubrication or replace the o-ring on the piston. | |||
| 3 | Work weakly and sluggishly | 1. Worn or damaged piston o-ring | Check and replace piston o-ring | |
| 2.Inadequate lubrication for head valve piston o-rings or too tight head valve piston o-rings | Place 2 or 6 drops of oil on o-rings or replace head valve piston o-rings | |||
| 3.Dirt in the nozzle | Check and clean the nozzle | |||
| 4 | Tool jams frequently | 1.Damaged or Worn driver (piston unit) | Check and replace driver (piston unit) | |
| 2.Damaged or Worn driver guide (nose) | Check and replace driver guide (nose) | |||
| 3.Driver guide cover is bent,so the space between driver guide cover and driver guide is too big | Check and replace driver guide cover | |||
| 5 | Nail can not be shot | 1. Driver (piston unit) can’t return to the correct position. | Refer to no. 1 Symptom | |
| 2.Driver guide(nose) can not match magazine well | Check and correct the position between driver guide(nose) and magazine | |||
| 3.Worn or damaged nail pusher compression spring | Check and replace nail pusher compression spring | |||
Product detail pictures:
Related Product Guide:
With the "Client-Oriented" business philosophy, a rigorous quality control system, advanced manufacturing equipment and a strong R&D team, we always provide high quality products, excellent services and competitive prices for Dry Wall Screws - N5023 16 Gauge 1 in. Wide Crown Stapler – SXJ , The product will supply to all over the world, such as: Brunei, Guatemala, Montreal, We'll initiate the second phase of our development strategy. Our company regards "reasonable prices, efficient production time and good after-sales service" as our tenet. If you are interested in any of our products and solutions or would like to discuss a custom order, make sure you feel free to contact us. We've been looking forward to forming successful business relationships with new clients around the world in the near future.
All of this staples use for furniture upholstery and other interior trim .
we are factory for produce staples ,furniture staples , upholstery staples , interior trim staples , heavy duty staples , narrow crown staples and so on
we spearte them according to them using .
each type the using is difference .
By Deborah from Guyana - 2017.01.28 19:59
The company's products can meet our diverse needs, and the price is cheap, the most important is that the quality is also very nice.
By Edwina from Las Vegas - 2018.10.01 14:14
