2022 High quality Black Screw - N5021 16 Gauge 15/16 in. Medium Crown Stapler – SXJ
2022 High quality Black Screw - N5021 16 Gauge 15/16 in. Medium Crown Stapler – SXJ Detail:
N5021 16 Gauge 15/16 in. Medium Crown Stapler
● Uses wide 15/16″ crown staples from 5/8″ – 2″ in length ● Tool-less depth of drive control for flush drives into various materials. ● Aluminum magazine and housing for long term durability. ● Clear jammed nails easily with cam-lock. ● Adjustable exhaust valve. ● Rubberized handle for better fit and added comfort. ● Cylinder valve firing mechanism provides a quick response ● High capacity magazine holds 150 staples, allowing for fewer replenishments. |
| Model: | N5021 16 Gauge 15/16 in. Wide Crown Stapler |
| Air Tool Type: | Air Stapler |
| Tool Diamensions: | 360mm x 76mm x 254mm (14-1/4″x10″x3″) |
| Net Tool Weight: | 2.42kgs(5.34 lbs) |
| Body Material: | Aliminum Body |
| Operate Pressure: | 70-120psi (5-8.3bar) |
| Load Capacity: | 150 staples |
| Staple Type: | 16 Gauge 15/16 in. Wide Crown Staple |
| Staples Shank Diameter: | 0.063″ x 0.055″ (1.6mm x 1.4mm) |
| Staple Crown: | 15/16″(23.8mm) |
| Staples Length: | 5/8″(16mm)-2″(50mm) |
16 Gauge Paslode 15/16 in. Wide Crown Staple Staples Shank Diameter:0.063″ x 0.055″ (1.6mm x 1.4mm) Staple Crown:15/16″(23.8mm) Staples Length:5/8“(16mm)-2″(50mm) |
Confortable rubber handle and ergonomic gun body design for easy operation.
Simple internal structure for easy maintenance application.
Paslode wire crown with aluminum magazine.
Quick-release nosepiece for clearing jam.
Depth adjustment engineered for more precise flush and countersink finish.
Wire lathing
Insulation sheating
Furniture industry.
Interior construction.
Cabinets,
Packaging.
| No. | Symptom | Problems | Solutions | |
| 1.1 | Air Leak | Air leak in the cylinder cap when tools don’t work | 1.Loose head valve piston seal or o-rings . | Check and replace the head valve piston set |
| 2.Worn or damaged o-ring or cylinder cap gasket under cylinder cap | Check and replace o-ring or cylinder cap gasket under the cylinder cap | |||
| 1.2 | Air leak in Trigger area when tools don’t work | 1.Damaged o-ring in trigger valve | Check and replace o-ring | |
| 2.Damaged o-ring in trigger valve stem | Check and replace o-ring | |||
| 3.Dirt in the trigger valve | Check and clean the trigger valve | |||
| 1.3 | Air leak in cylinder cap when tools are working | 1.Damaged head valve piston o-rings | Check and replace o-rings | |
| 2.Damaged seal under cylinder cap | Check and replace seal | |||
| 1.4 | Air leak in nose when tools are working | 1.Worn or damaged bumper | Check and replace bumper | |
| 2.Loose driver(piston unit) thread | Check and replace driver(piston unit) | |||
| 1.5 | Air leak in Trigger area when tools are working | 1.Worn or damaged trigger valve head | Check and replace trigger valve head | |
| 2.Damaged head valve piston o-rings | Check and replace head valve piston o-rings | |||
| 2 | Failed to get driver(piston unit) back to the correct position completely. | 1.The driver(piston unit) is not straight or the driver guide(nose) is wrong assembled. | Straighten the driver(piston unit) or verify driver guide(nose) and magazine | |
| 2.Worn or damaged nozzle | Check and replace nozzle | |||
| 3.The space between piston o-ring and cylinder is too tight. | Check if the cylinder is adequate lubrication or replace the o-ring on the piston. | |||
| 3 | Work weakly and sluggishly | 1. Worn or damaged piston o-ring | Check and replace piston o-ring | |
| 2.Inadequate lubrication for head valve piston o-rings or too tight head valve piston o-rings | Place 2 or 6 drops of oil on o-rings or replace head valve piston o-rings | |||
| 3.Dirt in the nozzle | Check and clean the nozzle | |||
| 4 | Tool jams frequently | 1.Damaged or Worn driver (piston unit) | Check and replace driver (piston unit) | |
| 2.Damaged or Worn driver guide (nose) | Check and replace driver guide (nose) | |||
| 3.Driver guide cover is bent,so the space between driver guide cover and driver guide is too big | Check and replace driver guide cover | |||
| 5 | Nail can not be shot | 1. Driver (piston unit) can’t return to the correct position. | Refer to no. 1 Symptom | |
| 2.Driver guide(nose) can not match magazine well | Check and correct the position between driver guide(nose) and magazine | |||
| 3.Worn or damaged nail pusher compression spring | Check and replace nail pusher compression spring | |||
Product detail pictures:
Related Product Guide:
Fast and good quotations, informed advisers to help you choose the correct product that suits all your needs, a short production time, responsible quality control and different services for paying and shipping affairs for 2022 High quality Black Screw - N5021 16 Gauge 15/16 in. Medium Crown Stapler – SXJ , The product will supply to all over the world, such as: Qatar, Ecuador, Morocco, By integrating manufacturing with foreign trade sectors, we can present total customer solutions by guaranteeing the delivery of right merchandise to the right place at the right time, which is supported by our abundant experiences, powerful production capability, consistent quality, diversified products and the control of the industry trend as well as our maturity before and after sales services. We'd like to share our ideas with you and welcome your comments and questions.
All of this staples use for furniture upholstery and other interior trim .
we are factory for produce staples ,furniture staples , upholstery staples , interior trim staples , heavy duty staples , narrow crown staples and so on
we spearte them according to them using .
each type the using is difference .
By Sahid Ruvalcaba from Jordan - 2018.04.25 16:46
We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.
By Phoenix from Korea - 2018.11.11 19:52
