• 162804425

Pneumatic 18 Gauge 1/4 Inch Narrow Crown Stapler 440KB

Short Description:


Product Detail

Overview
440KB

Pneumatic 18 Gauge 1/4 Inch Narrow Crown Stapler 440KB

Pneumatic 18 Gauge 1/4 Inch Narrow Crown Stapler 440KB is great for interior decorative trim, cabinetry, cabinet backing, crafts and hobbies. It is high speed, comfortable and easy to use.

“Partial Sequential mode”  safety system.

● Light die cast body of aluminum alloy .

● Top loading design.

● Remain nails display available.

● Non-marring tip available.

Product Description

 

Model: Pneumatic 18 Gauge 1/4 Inch Narrow Crown Stapler 440KB
Air Tool Type: Air Stapler
Tool Diamensions: 320mm x 75mm x 260mm
Net Tool Weight: 2.10kgs (4.63 lbs)
Operate Pressure: 60-100psi (4-7bar)
Load Capacity: 100 staples
Staples Type: 18 Gauge 90 Series Medium Wire Staples
Staples Crown: 1/4″(5.7mm)
Staples Shank Diameter: 1.25mm x 1.05mm
Staples Length: 5/8″(16mm)~1-9/16″(40mm)

 

90 series narrow crown staple

18 Gauge 90 Series Medium Wire Staples
Staples Crown:1/4″(5.7mm)
Staples Shank Diameter:1.25mm x 1.05mm
Staples Length:5/8″(16mm)~1-9/16″(40mm)
Features

 Lightweight body for easy operation.

 Comfortable rubber grip.

 Powerful strength and excellent durability.

 Designed with a long narrow nose for excellent job visibility.

Application

Cabinets.

Upholstery spring attachment.

Insulative sheathing.

440KB STAPLER

Our Services
No.  Symptom Problems Solutions
1.1 Air Leak Air leak in the cylinder cap when tools don’t work 1.Loose head valve piston seal or o-rings . Check and replace the head valve piston set
2.Worn or damaged o-ring or cylinder cap gasket under cylinder cap Check and replace o-ring or cylinder cap gasket under the cylinder cap
1.2 Air leak in Trigger area  when tools don’t work 1.Damaged o-ring in trigger valve Check and replace  o-ring
2.Damaged o-ring in trigger valve stem Check and replace o-ring
3.Dirt in the trigger valve Check and clean the trigger valve
1.3 Air leak in cylinder cap when tools are working 1.Damaged head valve piston o-rings Check and replace  o-rings
2.Damaged seal under cylinder cap Check and replace seal
1.4 Air leak in nose when tools are working 1.Worn or damaged bumper Check and replace bumper
2.Loose driver(piston unit) thread Check and replace driver(piston unit)
1.5 Air leak in Trigger area when tools are working 1.Worn or damaged trigger valve head Check and replace trigger valve head
2.Damaged head valve piston o-rings Check and replace head valve piston o-rings
2 Failed to get driver(piston unit) back to the correct position completely. 1.The driver(piston unit) is not straight or the driver guide(nose) is wrong assembled. Straighten the driver(piston unit)  or verify driver guide(nose) and magazine
2.Worn or damaged nozzle Check and replace nozzle
3.The space between piston o-ring and  cylinder is too tight. Check if the cylinder is adequate lubrication or replace the o-ring on the piston.
3 Work weakly and sluggishly 1. Worn or damaged  piston o-ring Check and replace piston o-ring
2.Inadequate lubrication for head valve piston o-rings or too tight head valve piston o-rings Place 2 or 6 drops of oil on o-rings or replace  head valve piston o-rings
3.Dirt in the nozzle Check and clean the nozzle
4 Tool jams frequently 1.Damaged or Worn driver (piston unit) Check and replace driver (piston unit)
2.Damaged or Worn driver guide (nose) Check and replace  driver guide (nose)
3.Driver guide cover is bent,so the space between driver guide cover and driver guide is too big Check and replace driver guide cover
5 Nail can not be shot 1. Driver (piston unit) can’t return to the correct position. Refer to no. 1  Symptom
2.Driver guide(nose) can not match magazine well Check and correct the position between driver guide(nose) and magazine
3.Worn or damaged nail pusher compression spring Check and replace nail pusher compression spring

  • Previous:
  • Next:

  • Write your message here and send it to us