• 162804425

20 Gauge Fine Wire Upholstery Stapler 1022

Short Description:


Product Detail

Overview
1022

20 Gauge Fine Wire Upholstery Stapler 1022

20 Gauge Fine Wire Upholstery Stapler 1022 is perfect for trim moulding, upholstery jobs, furniture and other small craft projects. It is fast, easy to use and maximizes your efficiency on the job.

Comfortable rubber grip.

● Lengthened thin muzzle design, operation more flexible and convenient.

● Light weight

● Ergonomically engineered body.

● 360° adjustable exhaust.

Product Description

 

Model: 20 Gauge Fine Wire Upholstery Stapler 1022
Air Tool Type: Air Stapler
Tool Diamensions: 179mm x 59mm x 250mm
Net Tool Weight: 1.20kgs (2.64 lbs)
Operate Pressure: 60-100psi (4-7bar)
Load Capacity: 100 staples
Staples Type: 20 Guage 10 Series Fine Wire Staples
Staples Crown: 7/16″(11.2mm)
Staples Shank Diameter: 0.050″(1.26mm) x 0.022″(0.55mm)
Staples Length: 1/4″(6mm)~7/8″(22mm)

 

80 series staples

20 Guage 10 Series Fine Wire Staples
Staples Crown:7/16″(11.20mm)
Staples Shank Diameter:0.050″(1.26mm) x 0.022″(0.55mm)
Staples Length:1/4″(6mm)~7/8″(22mm)
Features

 Lightweight and well balanced for easy operating.

 Superior power with hardened one piece for professional application.

 Open nose design for easy extraction of a jammed nail.

 Tool free depth of drive adjustment for flush or countersunk drive into varying material.

 Hardened claw tip, reduces wear and limits slippage when driving at a stand angle.

Application

Furniture

Cloth.

Decoration.

F30

Our Services
No.  Symptom Problems Solutions
1.1 Air Leak Air leak in the cylinder cap when tools don’t work 1.Loose head valve piston seal or o-rings . Check and replace the head valve piston set
2.Worn or damaged o-ring or cylinder cap gasket under cylinder cap Check and replace o-ring or cylinder cap gasket under the cylinder cap
1.2 Air leak in Trigger area  when tools don’t work 1.Damaged o-ring in trigger valve Check and replace  o-ring
2.Damaged o-ring in trigger valve stem Check and replace o-ring
3.Dirt in the trigger valve Check and clean the trigger valve
1.3 Air leak in cylinder cap when tools are working 1.Damaged head valve piston o-rings Check and replace  o-rings
2.Damaged seal under cylinder cap Check and replace seal
1.4 Air leak in nose when tools are working 1.Worn or damaged bumper Check and replace bumper
2.Loose driver(piston unit) thread Check and replace driver(piston unit)
1.5 Air leak in Trigger area when tools are working 1.Worn or damaged trigger valve head Check and replace trigger valve head
2.Damaged head valve piston o-rings Check and replace head valve piston o-rings
2 Failed to get driver(piston unit) back to the correct position completely. 1.The driver(piston unit) is not straight or the driver guide(nose) is wrong assembled. Straighten the driver(piston unit)  or verify driver guide(nose) and magazine
2.Worn or damaged nozzle Check and replace nozzle
3.The space between piston o-ring and  cylinder is too tight. Check if the cylinder is adequate lubrication or replace the o-ring on the piston.

  • Previous:
  • Next:

  • Write your message here and send it to us