16GA SR8 Galvanized Upholstery Hog Rings
16GA SR8 Galvanized Upholstery Hog Rings
● 16 Gauge 11/16” crown c ring staples. ● High Quality: Made of high quality metal, better corrosion resistance. ● Galvanized finish for greater rust resistance and Fewer too jams for finer carpentry and finishing. ● Good Bundle Effect: Have a good bundle effect, with excellent performance, high reliability. ● Sharp points offer good piercing capabilities and consistent ring closure. ● Long Life: Optimal durability, long service life, no need to replace too frequently. ● Suitable Application: Suitable for binding, fixing livestock cages, pet cages, fences, mattresses, etc. |
| Item: | 16GA SR8 Galvanized Upholstery Hog Rings |
| Gauge: | 16 Gauge |
| Fastener Type: | Hog rings |
| Material: | Galvanized Wire |
| Surface Finishing: | Galvanized |
| Point: | Sharp,Blunt |
| Outside Diameter: | 11/16 inch |
| Close Diameter: | 9/32 inch |
| Thickness: | 1.60mm |
| Height | 10.4mm |
| Packing: | 2500 pcs/ctn |
| Galvanized Hog Ring Specification | ||||||
| Style | Crown | Closed I.D. | Wire Gauge | Points | PCs per Box | Boxes per skid |
| C | 1/2″ | 1/8″ | 16 (1.60mm) | Blunt or Sharp | 10,000 | 120 boxes |
| 11/16″ | 9/32″ | 16 (1.60mm) | Blunt or Sharp | 2,500 | 750 boxes | |
| 3/4″ | 3/16″ | 16 (1.60mm) | Blunt or Sharp | 11,000 | 120 boxes | |
| 1 1/2″ | 9/16″ | 11 (3.08mm) | Blunt or Sharp | 1,600 | 96 boxes | |
| D | 9/16 inch | 1/4 inch | 16 (1.60mm) 15 (1.80mm) 14 (2.00mm) | Blunt or Sharp | 5,000 | 375 |
| 3/4 inch | 1/4 inch | 16 (1.60mm) 15 (1.80mm) 14 (2.0mm) | Blunt or Sharp | 10,000 | 100 | |
| 1-3/16 inch | 7/16 inch | 9 (3.66mm) | Blunt or Sharp | 2,500 | 100 | |
1. Gabion fixing
2. Steel cages
3. Fence
4. Gadernning fixure
5. Closing bag
6. River mattress
7. Outdoor industries fixing etc
● Good corrosion resistance.
● Good price.
● Durable & sturdy.
● Copper coating or vinyl coating available.
Bright Finish
Bright fasteners have no coating to protect the steel and are susceptible to corrosion if exposed to high humidity or water. They are not recommended for exterior use or in treated lumber, and only for interior applications where no corrosion protection is needed. Bright fasteners are often used for interior framing, trim and finish applications.
Electro Galvanized (EG)
Electro Galvanized fasteners have a very thin layer of Zinc that offers some corrosion protection. They are generally used in areas where minimal corrosion protection is needed such as bathrooms, kitchens and other areas that are susceptible to some water or humidity. Roofing nails are electro galvanized because they are generally replaced before the fastener begins to wear and are not exposed to harsh weather conditions if installed properly. Areas near the coasts where salt content in rain water is higher should consider a Hot Dip Galvanized or Stainless Steel fastener.
Stainless Steel (SS)
Stainless steel fasteners offer the best corrosion protection available. The steel may oxidize or rust over time but it will never lose its strength from corrosion. Stainless Steel fasteners can be used for exterior or interior applications and generally come in 304 or 316 stainless steel.
