• 162804425

16GA 16SS110 Stainless Steel Hog Rings

Short Description:


Product Detail

Overview

 

Stainless Steel Hog Rings 16GA 16SS110

516SS100 stainless steel hog rings-1

 

●  16 Gauge 3/4” crown c ring staples.

●  Made of Stainless Steel.

 

●  Staples Compatible with C7E, C7CA

● High tensile strength.

● No corrosion happens.

Sharp point nails deliver efficient and dependable performance.

Ideal for mattress, car seat, sofa, fencing, pet cage, traps, sausage casings and dozen more uses around farm and home.

 

Product Description

 

Item: 16GA 16SS110 Stainless Steel Hog Rings
Gauge: 16 Gauge
Fastener Type: Hog rings
Material: SS304
Surface Finishing: Stainless Steel
Point: Sharp, Blunt
Outside Diameter: 3/4 inch
Thickness: 1.80mm
Height 12.0mm
Packing: 11000 pcs/ctn
Fitting Tools: C7E, C7CA

516SS100-1
16G110 HOG RINGS

Description Part # Strip Size Box Count Box Weight Box Per Skid Skid Weight
Galvanized Sharp Point 16G110 110 rings 11,000 rings 15 lbs. 100 boxes 1,500 lbs.
Galvanized Blunt Point 16G110B 110 rings 11,000 rings 15 lbs. 100 boxes 1,500 lbs.
Galfan (Bezinal) Sharp Point 16GF110 110 rings 11,000 rings 15 lbs. 100 boxes 1,500 lbs.
Stainless Steel Sharp Point 16SS110 110 rings 11,000 rings 15 lbs. 100 boxes 1,500 lbs.
Aluminum Sharp Point 16AL110 110 rings 11,000 rings 6 lbs. 100 boxes 600 lbs.
Application

Wire fencing: chain link fence, welded wire mesh, chicken wire mesh, plastic mesh;

Wire cage: lobster & crab pots, rabbit cage, dog kennel, other animal cages;

Upholstery: automobile and domestic;

Gardening: bird netting, trellises;

Note: special specifications are customized on request.

15G100 HOG RINGS

Finishing

Bright Finish

Bright fasteners have no coating to protect the steel and are susceptible to corrosion if exposed to high humidity or water. They are not recommended for exterior use or in treated lumber, and only for interior applications where no corrosion protection is needed. Bright fasteners are often used for interior framing, trim and finish applications.

 

Hot Dip Galvanized (HDG)

Hot dip galvanized fasteners are coated with a layer of Zinc to help protect the steel from corroding. Although hot dip galvanized fasteners will corrode over time as the coating wears, they are generally good for the lifetime of the application. Hot dip galvanized fasteners are generally used for outdoor applications where the fastener is exposed to daily weather conditions such as rain and snow. Areas near the coasts where the salt content in rain water is much higher, should consider Stainless Steel fasteners as salt accelerates the deterioration of the galvanization and will accelerate corrosion.

 

Electro Galvanized (EG)

Electro Galvanized fasteners have a very thin layer of Zinc that offers some corrosion protection. They are generally used in areas where minimal corrosion protection is needed such as bathrooms, kitchens and other areas that are susceptible to some water or humidity. Roofing nails are electro galvanized because they are generally replaced before the fastener begins to wear and are not exposed to harsh weather conditions if installed properly. Areas near the coasts where salt content in rain water is higher should consider a Hot Dip Galvanized or Stainless Steel fastener.

 

Stainless Steel (SS)

Stainless steel fasteners offer the best corrosion protection available. The steel may oxidize or rust over time but it will never lose its strength from corrosion. Stainless Steel fasteners can be used for exterior or interior applications and generally come in 304 or 316 stainless steel.

 


  • Previous:
  • Next:

  • Write your message here and send it to us