• 162804425

16GA 16G110B 3/4 Inch Blunt Point Upholstery Hog Rings

Short Description:


Product Detail

Overview

 

16G110B HOG RINGS

16GA 16G110B 3/4 Inch Blunt Point Upholstery Hog Rings

 

●  16 Gauge 3/4” crown c ring staples.

●  Made of Galvanized Steel.

● Galvanized finish for greater rust resistance and Fewer too jams for finer carpentry and finishing.

● Made of high quality metal, better corrosion resistance.

Blunt Point promote safety hurting none who or which will be contacted directly.

Ideal for mattress, car seat, sofa, fencing, pet cage, traps, sausage casings and dozen more uses around farm and home.

 

Product Description

 

Item: 16GA 16G110B 3/4 Inch Blunt Point Upholstery Hog Rings
Gauge: 16 Gauge
Fastener Type: Hog rings
Material: Galvanized Wire
Surface Finishing: Galvanized
Point: Blunt
Outside Diameter: 3/4 inch
Thickness: 1.60mm
Height 12.0mm
Packing: 11000 pcs/ctn
Fitting Tools: C7E, C7CA

16G110B HOG RINGS
16G110 HOG RINGS

Application

1. Gabion fixing
2. Steel cages
3. Fence
4. Gadernning fixure
5. Closing bag
6. River mattress
7. Outdoor industries fixing etc

15G100 HOG RINGS

 

Feature

● Good corrosion resistance.

● Good price.

● Durable & sturdy.

● Copper coating or vinyl coating available.

Finishing

Bright Finish

Bright fasteners have no coating to protect the steel and are susceptible to corrosion if exposed to high humidity or water. They are not recommended for exterior use or in treated lumber, and only for interior applications where no corrosion protection is needed. Bright fasteners are often used for interior framing, trim and finish applications.

 

Hot Dip Galvanized (HDG)

Hot dip galvanized fasteners are coated with a layer of Zinc to help protect the steel from corroding. Although hot dip galvanized fasteners will corrode over time as the coating wears, they are generally good for the lifetime of the application. Hot dip galvanized fasteners are generally used for outdoor applications where the fastener is exposed to daily weather conditions such as rain and snow. Areas near the coasts where the salt content in rain water is much higher, should consider Stainless Steel fasteners as salt accelerates the deterioration of the galvanization and will accelerate corrosion.

 

Electro Galvanized (EG)

Electro Galvanized fasteners have a very thin layer of Zinc that offers some corrosion protection. They are generally used in areas where minimal corrosion protection is needed such as bathrooms, kitchens and other areas that are susceptible to some water or humidity. Roofing nails are electro galvanized because they are generally replaced before the fastener begins to wear and are not exposed to harsh weather conditions if installed properly. Areas near the coasts where salt content in rain water is higher should consider a Hot Dip Galvanized or Stainless Steel fastener.

 

Stainless Steel (SS)

Stainless steel fasteners offer the best corrosion protection available. The steel may oxidize or rust over time but it will never lose its strength from corrosion. Stainless Steel fasteners can be used for exterior or interior applications and generally come in 304 or 316 stainless steel.

 


  • Previous:
  • Next:

  • Write your message here and send it to us