• 162804425

14 Gauge 1/2" Stainless Steel Loose Hog Rings 514DSSB

Short Description:


Product Detail

Overview

 

14 Gauge 1/2″ Stainless Steel Loose Hog Rings

514DSSB

 

●  14 Gauge 1/2” crown D ring staples.

●  Made of Stainless Steel.

● High tensile strength.

● No corrosion happens.

● It featuresblunt tips to promote safety. 

● Ideal for Netting, Seating, Upholstery, Fencing, Bungee

Cords, Silt Fence, Bag Closure, Cages 

 

 

Product Description

 

Item: Stainless Steel Loose Rings 14GA 514DSSB 
Gauge: 14 Gauge
Fastener Type: D rings
Material: SS304
Surface Finishing: Stainless Steel
Point: Blunt
Open Diameter: 1/2 inch (12.7mm)
Closed Diameter: 1/4 Inch (6.35mm)
Thickness: 2.0mm
Packing: 25 lbs/box
Tensile Strength:  110 – 130 kpsi (828 N/mm2) 

514DSSB stainless steel hog rings

Description Part # Strip Size Box Count Box Weight Box Per Skid Skid Weight
15g Bright Loose Sharp (3/4”) 15DL - - 25 lbs. 80 2,000 lbs.
15g Stainless Loose Blunt   (3/8”) 315DSSB - - 25 lbs. 80 2,000 lbs.
14g Galvanized Loose Blunt   (3/8”) 314DGB - - 25 lbs. 80 2,000 lbs.
14g Stainless Loose Blunt   (3/8”) 314DSSB - - 25 lbs. 80 2,000 lbs.
15g Stainless Loose Blunt   (1/2”) 515DSSB - - 25 lbs. 80 2,000 lbs.
14g Galvanized Loose Blunt   (1/2”) 514DGB - - 25 lbs. 80 2,000 lbs.
14g Stainless Loose Blunt   (1/2”) 514DSSB - - 25 lbs. 80 2,000 lbs.
15g Stainless Loose Blunt   (3/4”) 715DSSB - - 25 lbs. 80 2,000 lbs.
14g Galvanized Loose Blunt   (3/4”) 714DGB - - 25 lbs. 80 2,000 lbs.
14g Stainless Loose Blunt   (3/4”) 714DSSB - - 25 lbs. 80 2,000 lbs.
Application

Wire fencing: chain link fence, welded wire mesh, chicken wire mesh, plastic mesh;

Wire cage: lobster & crab pots, rabbit cage, dog kennel, other animal cages;

Upholstery: automobile and domestic;

Gardening: bird netting, trellises;

Note: special specifications are customized on request.

15G100 HOG RINGS

Finishing

Bright Finish

Bright fasteners have no coating to protect the steel and are susceptible to corrosion if exposed to high humidity or water. They are not recommended for exterior use or in treated lumber, and only for interior applications where no corrosion protection is needed. Bright fasteners are often used for interior framing, trim and finish applications.

 

Hot Dip Galvanized (HDG)

Hot dip galvanized fasteners are coated with a layer of Zinc to help protect the steel from corroding. Although hot dip galvanized fasteners will corrode over time as the coating wears, they are generally good for the lifetime of the application. Hot dip galvanized fasteners are generally used for outdoor applications where the fastener is exposed to daily weather conditions such as rain and snow. Areas near the coasts where the salt content in rain water is much higher, should consider Stainless Steel fasteners as salt accelerates the deterioration of the galvanization and will accelerate corrosion.

 

Electro Galvanized (EG)

Electro Galvanized fasteners have a very thin layer of Zinc that offers some corrosion protection. They are generally used in areas where minimal corrosion protection is needed such as bathrooms, kitchens and other areas that are susceptible to some water or humidity. Roofing nails are electro galvanized because they are generally replaced before the fastener begins to wear and are not exposed to harsh weather conditions if installed properly. Areas near the coasts where salt content in rain water is higher should consider a Hot Dip Galvanized or Stainless Steel fastener.

 

Stainless Steel (SS)

Stainless steel fasteners offer the best corrosion protection available. The steel may oxidize or rust over time but it will never lose its strength from corrosion. Stainless Steel fasteners can be used for exterior or interior applications and generally come in 304 or 316 stainless steel.

 


  • Previous:
  • Next:

  • Write your message here and send it to us